Fusion95 provides PC-to-UNIX connectivity via TCP/IP and RFC NetBIOS with a UNIX based file and printer server together with a terminal emulator for PC clients.
Fusion95 is developed by april system design and marketed in over 39 countries.
The Fusion family consists of Fusion95 operating over a TCP/IP transport and POWERfusion operating over a NetBIOS transport. Over 70,000 users worldwide use Fusion to provide PC-to-UNIX connectivity. POWERfusion has been awarded "Editor's Choice" by the American PC Magazine and "Best-in-Test" by the Swedish PC World. Fusion95 is an enhanced version of the POWERfusion server with better support for the newer Windows workstations.
Use your UNIX machine as a PC file server. Fusion95 implements CIFS/SMB file and printer services including file and record locking on the UNIX system allowing thousands of DOS, Windows, and OS/2 applications to reside on a UNIX file system. These disks and printers appear to the workstation as normal network resources.
UNIX applications can print to PC printers and PC users can print to all UNIX printers. The UNIX lp spooler system can be used as if it were a local PC resource (e.g. LPT2:). Fusion95 allows all printers to be accessed by all users.
Fusion95 includes high performance Windows terminal emulation support for ANSI, VT220, VT320 and Wyse. The Windows emulator, called AniTa, is also available separately.
A quick and easy installation connects UNIX to your LAN in less than 10 minutes.
No changes to your existing network. If you already have an RFC-TCP/IP network, for example as provided with Windows95, then a UNIX machine running Fusion95 can be added to your network without you needing to change any server or workstation. Just plug in Fusion95, and all existing users can immediately access UNIX applications and resources.
Fusion95 provides easy to use configuration utilities which can either run in Windows or in UNIX. These allow the administrator to configure Fusion95 from anywhere in the LAN or even accross a Wide Area network.
The Windows based administration program shows graphically all the Fusion95 servers in the network. The administrator can view, add, change or delete disk and printer resources as well as users.
It is possible to restrict administration from Windows to certain users, or to require special password authentication. It is even possible to disable administration from Windows for specific Fusion95 machines, in which case the server appears crossed out with a red X, and it is then only possible to view which resources are shared.
Fusion95 provides three different security modes; Share-Level, User-Level and Unix-Level. With Share-Level security the access to UNIX resources protected by passwords. With User-Level and Unix-Level security the access to UNIX resources protected by user name/account and password authentication.
The Windows based administration program shows graphically all the Users configured on a Fusion95 server running User-Level security. These PC users can be optionally mapped to different UNIX username. Their password and home directories can also be changed from the UNIX default. Specific users can be given administration rights to the Fusion95 server, and these are shown grapgically carrying a breifcase.
Revolutionary new trigger-technology allows UNIX applications to monitor, filter and change server actions when a user accesses disks and files. Specific actions can be configured to trigger when specific events occur.
Fusion95 can optionally be configured to give support for NET LOGON from Windows95, Windows98, WfW and LAN Manager workstations.
When NET LOGON is used, information containing the user's network resources is retrieved from Fusion95 every time the PC logs on. This gives easier administration and gives the user the same network environment regardless of which network PC is being used. There is even support for execution of a user's own batch file at logon time.
Fusion95 is built on standards. It rests upon the standard TCP/IP transport. The Internet RFC 1001/1002 specification provides the standard for NetBIOS over TCP/IP including name resolution. The file system support is provided by the SMB (Server Message Block) protocol, an X/OPEN as well as an industry standard, being used in all Microsoft and IBM LAN products. The new industry standard CIFS (Common Internet File System) is also supported by Fusion95.
|Download the latest versions for evaluation or upgrading.|
|Fusion95 FAQ (Frequently Asked Questions).|
|See also White Paper for Fusion95|
|© Copyright 2004-2017||Developed by April System Design|